Stage 4 Mathematics Syllabus Pdf

Purpose of study

Mathematics is a creative and highly interconnected discipline that has been developed over centuries, providing the solution to some of history's most intriguing problems. It is essential to everyday life, critical to science, technology and engineering, and necessary for financial literacy and most forms of employment. A high-quality mathematics education therefore provides a foundation for understanding the world, the ability to reason mathematically, an appreciation of the beauty and power of mathematics, and a sense of enjoyment and curiosity about the subject.

Aims

The national curriculum for mathematics aims to ensure that all pupils:

become fluent in the fundamentals of mathematics, including through varied and frequent practice with increasingly complex problems over time, so that pupils develop conceptual understanding and the ability to recall and apply knowledge rapidly and accurately
reason mathematically by following a line of enquiry, conjecturing relationships and generalisations, and developing an argument, justification or proof using mathematical language
can solve problems by applying their mathematics to a variety of routine and non-routine problems with increasing sophistication, including breaking down problems into a series of simpler steps and persevering in seeking solutions

Mathematics is an interconnected subject in which pupils need to be able to move fluently between representations of mathematical ideas. The programmes of study are, by necessity, organised into apparently distinct domains, but pupils should make rich connections across mathematical ideas to develop fluency, mathematical reasoning and competence in solving increasingly sophisticated problems. They should also apply their mathematical knowledge to science and other subjects.

The expectation is that the majority of pupils will move through the programmes of study at broadly the same pace. However, decisions about when to progress should always be based on the security of pupils' understanding and their readiness to progress to the next stage. Pupils who grasp concepts rapidly should be challenged through being offered rich and sophisticated problems before any acceleration through new content. Those who are not sufficiently fluent with earlier material should consolidate their understanding, including through additional practice, before moving on.

Information and communication technology (ICT)

Calculators should not be used as a substitute for good written and mental arithmetic. They should therefore only be introduced near the end of key stage 2 to support pupils' conceptual understanding and exploration of more complex number problems, if written and mental arithmetic are secure. In both primary and secondary schools, teachers should use their judgement about when ICT tools should be used.

Spoken language

The national curriculum for mathematics reflects the importance of spoken language in pupils' development across the whole curriculum – cognitively, socially and linguistically. The quality and variety of language that pupils hear and speak are key factors in developing their mathematical vocabulary and presenting a mathematical justification, argument or proof. They must be assisted in making their thinking clear to themselves as well as others, and teachers should ensure that pupils build secure foundations by using discussion to probe and remedy their misconceptions.

School curriculum

The programmes of study for mathematics are set out year-by-year for key stages 1 and 2. Schools are, however, only required to teach the relevant programme of study by the end of the key stage. Within each key stage, schools therefore have the flexibility to introduce content earlier or later than set out in the programme of study. In addition, schools can introduce key stage content during an earlier key stage, if appropriate. All schools are also required to set out their school curriculum for mathematics on a year-by-year basis and make this information available online.

Attainment targets

By the end of each key stage, pupils are expected to know, apply and understand the matters, skills and processes specified in the relevant programme of study.

Schools are not required by law to teach the example content in [square brackets] or the content indicated as being 'non-statutory'.

Key stage 1 - years 1 and 2

The principal focus of mathematics teaching in key stage 1 is to ensure that pupils develop confidence and mental fluency with whole numbers, counting and place value. This should involve working with numerals, words and the 4 operations, including with practical resources [for example, concrete objects and measuring tools].

At this stage, pupils should develop their ability to recognise, describe, draw, compare and sort different shapes and use the related vocabulary. Teaching should also involve using a range of measures to describe and compare different quantities such as length, mass, capacity/volume, time and money.

By the end of year 2, pupils should know the number bonds to 20 and be precise in using and understanding place value. An emphasis on practice at this early stage will aid fluency.

Pupils should read and spell mathematical vocabulary, at a level consistent with their increasing word reading and spelling knowledge at key stage 1.

Year 1 programme of study

Number - number and place value

Pupils should be taught to:

count to and across 100, forwards and backwards, beginning with 0 or 1, or from any given number
count, read and write numbers to 100 in numerals; count in multiples of 2s, 5s and 10s
given a number, identify 1 more and 1 less
identify and represent numbers using objects and pictorial representations including the number line, and use the language of: equal to, more than, less than (fewer), most, least
read and write numbers from 1 to 20 in numerals and words

Notes and guidance (non-statutory)

Pupils practise counting (1, 2, 3…), ordering (for example, first, second, third…), and to indicate a quantity (for example, 3 apples, 2 centimetres), including solving simple concrete problems, until they are fluent.

Pupils begin to recognise place value in numbers beyond 20 by reading, writing, counting and comparing numbers up to 100, supported by objects and pictorial representations.

They practise counting as reciting numbers and counting as enumerating objects, and counting in 2s, 5s and 10s from different multiples to develop their recognition of patterns in the number system (for example, odd and even numbers), including varied and frequent practice through increasingly complex questions.

They recognise and create repeating patterns with objects and with shapes.

Number - addition and subtraction

Pupils should be taught to:

read, write and interpret mathematical statements involving addition (+), subtraction (−) and equals (=) signs
represent and use number bonds and related subtraction facts within 20
add and subtract one-digit and two-digit numbers to 20, including 0
solve one-step problems that involve addition and subtraction, using concrete objects and pictorial representations, and missing number problems such as 7 = ? − 9

Notes and guidance (non-statutory)

Pupils memorise and reason with number bonds to 10 and 20 in several forms (for example, 9 + 7 = 16; 16 − 7 = 9; 7 = 16 − 9). They should realise the effect of adding or subtracting 0. This establishes addition and subtraction as related operations.

Pupils combine and increase numbers, counting forwards and backwards.

They discuss and solve problems in familiar practical contexts, including using quantities. Problems should include the terms: put together, add, altogether, total, take away, distance between, difference between, more than and less than, so that pupils develop the concept of addition and subtraction and are enabled to use these operations flexibly.

Number - multiplication and division

Pupils should be taught to:

solve one-step problems involving multiplication and division, by calculating the answer using concrete objects, pictorial representations and arrays with the support of the teacher

Notes and guidance (non-statutory)

Through grouping and sharing small quantities, pupils begin to understand: multiplication and division; doubling numbers and quantities; and finding simple fractions of objects, numbers and quantities.

They make connections between arrays, number patterns, and counting in 2s, 5s and 10s.

Number - fractions

Pupils should be taught to:

recognise, find and name a half as 1 of 2 equal parts of an object, shape or quantity
recognise, find and name a quarter as 1 of 4 equal parts of an object, shape or quantity

Notes and guidance (non-statutory)

Pupils are taught half and quarter as 'fractions of' discrete and continuous quantities by solving problems using shapes, objects and quantities. For example, they could recognise and find half a length, quantity, set of objects or shape. Pupils connect halves and quarters to the equal sharing and grouping of sets of objects and to measures, as well as recognising and combining halves and quarters as parts of a whole.

Measurement

Pupils should be taught to:

compare, describe and solve practical problems for:
- lengths and heights [for example, long/short, longer/shorter, tall/short, double/half]
- mass/weight [for example, heavy/light, heavier than, lighter than]
- capacity and volume [for example, full/empty, more than, less than, half, half full, quarter]
- time [for example, quicker, slower, earlier, later]
measure and begin to record the following:
- lengths and heights
- mass/weight
- capacity and volume
- time (hours, minutes, seconds)
- recognise and know the value of different denominations of coins and notes
- sequence events in chronological order using language [for example, before and after, next, first, today, yesterday, tomorrow, morning, afternoon and evening]
recognise and use language relating to dates, including days of the week, weeks, months and years
tell the time to the hour and half past the hour and draw the hands on a clock face to show these times

Notes and guidance (non-statutory)

The pairs of terms: mass and weight, volume and capacity, are used interchangeably at this stage.

Pupils move from using and comparing different types of quantities and measures using non-standard units, including discrete (for example, counting) and continuous (for example, liquid) measurement, to using manageable common standard units.

In order to become familiar with standard measures, pupils begin to use measuring tools such as a ruler, weighing scales and containers.

Pupils use the language of time, including telling the time throughout the day, first using o'clock and then half past.

Geometry - properties of shapes

Pupils should be taught to:

recognise and name common 2-D and 3-D shapes, including:
- 2-D shapes [for example, rectangles (including squares), circles and triangles]
- 3-D shapes [for example, cuboids (including cubes), pyramids and spheres]

Notes and guidance (non-statutory)

Pupils handle common 2-D and 3-D shapes, naming these and related everyday objects fluently. They recognise these shapes in different orientations and sizes, and know that rectangles, triangles, cuboids and pyramids are not always similar to each other.

Geometry - position and direction

Pupils should be taught to:

describe position, direction and movement, including whole, half, quarter and three-quarter turns

Notes and guidance (non-statutory)

Pupils use the language of position, direction and motion, including: left and right, top, middle and bottom, on top of, in front of, above, between, around, near, close and far, up and down, forwards and backwards, inside and outside.

Pupils make whole, half, quarter and three-quarter turns in both directions and connect turning clockwise with movement on a clock face.

Year 2 programme of study

Number - number and place value

Pupils should be taught to:

count in steps of 2, 3, and 5 from 0, and in 10s from any number, forward and backward
recognise the place value of each digit in a two-digit number (10s, 1s)
identify, represent and estimate numbers using different representations, including the number line
compare and order numbers from 0 up to 100; use <, > and = signs
read and write numbers to at least 100 in numerals and in words
use place value and number facts to solve problems

Notes and guidance (non-statutory)

Using materials and a range of representations, pupils practise counting, reading, writing and comparing numbers to at least 100 and solving a variety of related problems to develop fluency. They count in multiples of 3 to support their later understanding of a third.

As they become more confident with numbers up to 100, pupils are introduced to larger numbers to develop further their recognition of patterns within the number system and represent them in different ways, including spatial representations.

Pupils should partition numbers in different ways (for example, 23 = 20 + 3 and 23 = 10 + 13) to support subtraction. They become fluent and apply their knowledge of numbers to reason with, discuss and solve problems that emphasise the value of each digit in two-digit numbers. They begin to understand 0 as a place holder.

Number - addition and subtraction

Pupils should be taught to:

solve problems with addition and subtraction:
- using concrete objects and pictorial representations, including those involving numbers, quantities and measures
- applying their increasing knowledge of mental and written methods
recall and use addition and subtraction facts to 20 fluently, and derive and use related facts up to 100
add and subtract numbers using concrete objects, pictorial representations, and mentally, including:
- a two-digit number and 1s
- a two-digit number and 10s
- 2 two-digit numbers
- adding 3 one-digit numbers
show that addition of 2 numbers can be done in any order (commutative) and subtraction of 1 number from another cannot
recognise and use the inverse relationship between addition and subtraction and use this to check calculations and solve missing number problems

Notes and guidance (non-statutory)

Pupils extend their understanding of the language of addition and subtraction to include sum and difference.

Pupils practise addition and subtraction to 20 to become increasingly fluent in deriving facts such as using 3 + 7 = 10; 10 − 7 = 3 and 7 = 10 − 3 to calculate 30 + 70 = 100; 100 − 70 = 30 and 70 = 100 − 30. They check their calculations, including by adding to check subtraction and adding numbers in a different order to check addition (for example, 5 + 2 + 1 = 1 + 5 + 2 = 1 + 2 + 5). This establishes commutativity and associativity of addition.

Recording addition and subtraction in columns supports place value and prepares for formal written methods with larger numbers.

Number - multiplication and division

Pupils should be taught to:

recall and use multiplication and division facts for the 2, 5 and 10 multiplication tables, including recognising odd and even numbers
calculate mathematical statements for multiplication and division within the multiplication tables and write them using the multiplication (×), division (÷) and equals (=) signs
show that multiplication of 2 numbers can be done in any order (commutative) and division of 1 number by another cannot
solve problems involving multiplication and division, using materials, arrays, repeated addition, mental methods, and multiplication and division facts, including problems in contexts

Notes and guidance (non-statutory)

Pupils use a variety of language to describe multiplication and division.

Pupils are introduced to the multiplication tables. They practise to become fluent in the 2, 5 and 10 multiplication tables and connect them to each other. They connect the 10 multiplication table to place value, and the 5 multiplication table to the divisions on the clock face. They begin to use other multiplication tables and recall multiplication facts, including using related division facts to perform written and mental calculations.

Pupils work with a range of materials and contexts in which multiplication and division relate to grouping and sharing discrete and continuous quantities, to arrays and to repeated addition. They begin to relate these to fractions and measures (for example, 40 ÷ 2 = 20, 20 is a half of 40). They use commutativity and inverse relations to develop multiplicative reasoning (for example, 4 × 5 = 20 and 20 ÷ 5 = 4).

Number - fractions

Pupils should be taught to:

Notes and guidance (non-statutory)

Pupils use fractions as 'fractions of' discrete and continuous quantities by solving problems using shapes, objects and quantities. They connect unit fractions to equal sharing and grouping, to numbers when they can be calculated, and to measures, finding fractions of lengths, quantities, sets of objects or shapes. They meet 3/4 as the first example of a non-unit fraction.

Pupils should count in fractions up to 10, starting from any number and using the 1/2 and 2/4 equivalence on the number line (for example, 1 1/4 , 1 2/4 (or 1 1/2 ), 1 3/4 , 2). This reinforces the concept of fractions as numbers and that they can add up to more than 1.

Measurement

Pupils should be taught to:

choose and use appropriate standard units to estimate and measure length/height in any direction (m/cm); mass (kg/g); temperature (°C); capacity (litres/ml) to the nearest appropriate unit, using rulers, scales, thermometers and measuring vessels
compare and order lengths, mass, volume/capacity and record the results using >, < and =
recognise and use symbols for pounds (£) and pence (p); combine amounts to make a particular value
find different combinations of coins that equal the same amounts of money
solve simple problems in a practical context involving addition and subtraction of money of the same unit, including giving change
compare and sequence intervals of time
tell and write the time to five minutes, including quarter past/to the hour and draw the hands on a clock face to show these times
know the number of minutes in an hour and the number of hours in a day

Notes and guidance (non-statutory)

Pupils use standard units of measurement with increasing accuracy, using their knowledge of the number system. They use the appropriate language and record using standard abbreviations.

Comparing measures includes simple multiples such as 'half as high'; 'twice as wide'.

Pupils become fluent in telling the time on analogue clocks and recording it.

They become fluent in counting and recognising coins. They read and say amounts of money confidently and use the symbols £ and p accurately, recording pounds and pence separately.

Geometry - properties of shapes

Pupils should be taught to:

identify and describe the properties of 2-D shapes, including the number of sides, and line symmetry in a vertical line
identify and describe the properties of 3-D shapes, including the number of edges, vertices and faces
identify 2-D shapes on the surface of 3-D shapes, [for example, a circle on a cylinder and a triangle on a pyramid]
compare and sort common 2-D and 3-D shapes and everyday objects

Notes and guidance (non-statutory)

Pupils handle and name a wide variety of common 2-D and 3-D shapes including: quadrilaterals and polygons and cuboids, prisms and cones, and identify the properties of each shape (for example, number of sides, number of faces). Pupils identify, compare and sort shapes on the basis of their properties and use vocabulary precisely, such as sides, edges, vertices and faces.

Pupils read and write names for shapes that are appropriate for their word reading and spelling.

Pupils draw lines and shapes using a straight edge.

Geometry - position and direction

Pupils should be taught to:

order and arrange combinations of mathematical objects in patterns and sequences
use mathematical vocabulary to describe position, direction and movement, including movement in a straight line and distinguishing between rotation as a turn and in terms of right angles for quarter, half and three-quarter turns (clockwise and anti-clockwise)

Notes and guidance (non-statutory)

Pupils should work with patterns of shapes, including those in different orientations.

Pupils use the concept and language of angles to describe 'turn' by applying rotations, including in practical contexts (for example, pupils themselves moving in turns, giving instructions to other pupils to do so, and programming robots using instructions given in right angles).

Statistics

Pupils should be taught to:

interpret and construct simple pictograms, tally charts, block diagrams and tables
ask and answer simple questions by counting the number of objects in each category and sorting the categories by quantity
ask-and-answer questions about totalling and comparing categorical data

Notes and guidance (non-statutory)

Pupils record, interpret, collate, organise and compare information (for example, using many-to-one correspondence in pictograms with simple ratios 2, 5,10).

Lower key stage 2 - years 3 and 4

The principal focus of mathematics teaching in lower key stage 2 is to ensure that pupils become increasingly fluent with whole numbers and the 4 operations, including number facts and the concept of place value. This should ensure that pupils develop efficient written and mental methods and perform calculations accurately with increasingly large whole numbers.

At this stage, pupils should develop their ability to solve a range of problems, including with simple fractions and decimal place value. Teaching should also ensure that pupils draw with increasing accuracy and develop mathematical reasoning so they can analyse shapes and their properties, and confidently describe the relationships between them. It should ensure that they can use measuring instruments with accuracy and make connections between measure and number.

By the end of year 4, pupils should have memorised their multiplication tables up to and including the 12 multiplication table and show precision and fluency in their work.

Pupils should read and spell mathematical vocabulary correctly and confidently, using their growing word-reading knowledge and their knowledge of spelling.

Year 3 programme of study

Number - number and place value

Pupils should be taught to:

count from 0 in multiples of 4, 8, 50 and 100; find 10 or 100 more or less than a given number
recognise the place value of each digit in a 3-digit number (100s, 10s, 1s)
compare and order numbers up to 1,000
identify, represent and estimate numbers using different representations
read and write numbers up to 1,000 in numerals and in words
solve number problems and practical problems involving these ideas

Notes and guidance (non-statutory)

Pupils now use multiples of 2, 3, 4, 5, 8, 10, 50 and 100.

They use larger numbers to at least 1,000, applying partitioning related to place value using varied and increasingly complex problems, building on work in year 2 (for example, 146 = 100 + 40 + 6, 146 = 130 +16).

Using a variety of representations, including those related to measure, pupils continue to count in 1s, 10s and 100s, so that they become fluent in the order and place value of numbers to 1,000.

Number - addition and subtraction

Pupils should be taught to:

add and subtract numbers mentally, including:
- a three-digit number and 1s
- a three-digit number and 10s
- a three-digit number and 100s
add and subtract numbers with up to 3 digits, using formal written methods of columnar addition and subtraction
estimate the answer to a calculation and use inverse operations to check answers
solve problems, including missing number problems, using number facts, place value, and more complex addition and subtraction

Notes and guidance (non-statutory)

Pupils practise solving varied addition and subtraction questions. For mental calculations with two-digit numbers, the answers could exceed 100.

Pupils use their understanding of place value and partitioning, and practise using columnar addition and subtraction with increasingly large numbers up to 3 digits to become fluent (see Mathematics appendix 1).

Number - multiplication and division

Pupils should be taught to:

recall and use multiplication and division facts for the 3, 4 and 8 multiplication tables
write and calculate mathematical statements for multiplication and division using the multiplication tables that they know, including for two-digit numbers times one-digit numbers, using mental and progressing to formal written methods
solve problems, including missing number problems, involving multiplication and division, including positive integer scaling problems and correspondence problems in which n objects are connected to m objects

Notes and guidance (non-statutory)

Pupils continue to practise their mental recall of multiplication tables when they are calculating mathematical statements in order to improve fluency. Through doubling, they connect the 2, 4 and 8 multiplication tables.

Pupils develop efficient mental methods, for example, using commutativity and associativity (for example, 4 × 12 × 5 = 4 × 5 × 12 = 20 × 12 = 240) and multiplication and division facts (for example, using 3 × 2 = 6, 6 ÷ 3 = 2 and 2 = 6 ÷ 3) to derive related facts (30 × 2 = 60, 60 ÷ 3 = 20 and 20 = 60 ÷ 3).

Pupils develop reliable written methods for multiplication and division, starting with calculations of two-digit numbers by one-digit numbers and progressing to the formal written methods of short multiplication and division.

Pupils solve simple problems in contexts, deciding which of the 4 operations to use and why. These include measuring and scaling contexts, (for example 4 times as high, 8 times as long etc) and correspondence problems in which m objects are connected to n objects (for example, 3 hats and 4 coats, how many different outfits?; 12 sweets shared equally between 4 children; 4 cakes shared equally between 8 children).

Number - fractions

Pupils should be taught to:

Notes and guidance (non-statutory)

Pupils connect tenths to place value, decimal measures and to division by 10.

They begin to understand unit and non-unit fractions as numbers on the number line, and deduce relations between them, such as size and equivalence. They should go beyond the [0, 1] interval, including relating this to measure.

Pupils understand the relation between unit fractions as operators (fractions of), and division by integers.

They continue to recognise fractions in the context of parts of a whole, numbers, measurements, a shape, and unit fractions as a division of a quantity.

Pupils practise adding and subtracting fractions with the same denominator through a variety of increasingly complex problems to improve fluency.

Measurement

Pupils should be taught to:

measure, compare, add and subtract: lengths (m/cm/mm); mass (kg/g); volume/capacity (l/ml)
measure the perimeter of simple 2-D shapes
add and subtract amounts of money to give change, using both £ and p in practical contexts
tell and write the time from an analogue clock, including using Roman numerals from I to XII, and 12-hour and 24-hour clocks
estimate and read time with increasing accuracy to the nearest minute; record and compare time in terms of seconds, minutes and hours; use vocabulary such as o'clock, am/pm, morning, afternoon, noon and midnight
know the number of seconds in a minute and the number of days in each month, year and leap year
compare durations of events [for example, to calculate the time taken by particular events or tasks]

Notes and guidance (non-statutory)

Pupils continue to measure using the appropriate tools and units, progressing to using a wider range of measures, including comparing and using mixed units (for example, 1 kg and 200g) and simple equivalents of mixed units (for example, 5m = 500cm).

The comparison of measures includes simple scaling by integers (for example, a given quantity or measure is twice as long or 5 times as high) and this connects to multiplication.

Pupils continue to become fluent in recognising the value of coins, by adding and subtracting amounts, including mixed units, and giving change using manageable amounts. They record £ and p separately. The decimal recording of money is introduced formally in year 4.

Pupils use both analogue and digital 12-hour clocks and record their times. In this way they become fluent in and prepared for using digital 24-hour clocks in year 4.

Geometry - properties of shapes

Pupils should be taught to:

draw 2-D shapes and make 3-D shapes using modelling materials; recognise 3-D shapes in different orientations and describe them
recognise angles as a property of shape or a description of a turn
identify right angles, recognise that 2 right angles make a half-turn, 3 make three-quarters of a turn and 4 a complete turn; identify whether angles are greater than or less than a right angle
identify horizontal and vertical lines and pairs of perpendicular and parallel lines

Notes and guidance (non-statutory)

Pupils' knowledge of the properties of shapes is extended at this stage to symmetrical and non-symmetrical polygons and polyhedra. Pupils extend their use of the properties of shapes. They should be able to describe the properties of 2-D and 3-D shapes using accurate language, including lengths of lines and acute and obtuse for angles greater or lesser than a right angle.

Pupils connect decimals and rounding to drawing and measuring straight lines in centimetres, in a variety of contexts.

Statistics

Pupils should be taught to:

interpret and present data using bar charts, pictograms and tables
solve one-step and two-step questions [for example 'How many more?' and 'How many fewer?'] using information presented in scaled bar charts and pictograms and tables

Notes and guidance (non-statutory)

Pupils understand and use simple scales (for example, 2, 5, 10 units per cm) in pictograms and bar charts with increasing accuracy.

They continue to interpret data presented in many contexts.

Year 4 programme of study

Number - number and place value

Pupils should be taught to:

count in multiples of 6, 7, 9, 25 and 1,000
find 1,000 more or less than a given number
count backwards through 0 to include negative numbers
recognise the place value of each digit in a four-digit number (1,000s, 100s, 10s, and 1s)
order and compare numbers beyond 1,000
identify, represent and estimate numbers using different representations
round any number to the nearest 10, 100 or 1,000
solve number and practical problems that involve all of the above and with increasingly large positive numbers
read Roman numerals to 100 (I to C) and know that over time, the numeral system changed to include the concept of 0 and place value

Notes and guidance (non-statutory)

Using a variety of representations, including measures, pupils become fluent in the order and place value of numbers beyond 1,000, including counting in 10s and 100s, and maintaining fluency in other multiples through varied and frequent practice.

They begin to extend their knowledge of the number system to include the decimal numbers and fractions that they have met so far.

They connect estimation and rounding numbers to the use of measuring instruments.

Roman numerals should be put in their historical context so pupils understand that there have been different ways to write whole numbers and that the important concepts of 0 and place value were introduced over a period of time.

Number - addition and subtraction

Pupils should be taught to:

add and subtract numbers with up to 4 digits using the formal written methods of columnar addition and subtraction where appropriate
estimate and use inverse operations to check answers to a calculation
solve addition and subtraction two-step problems in contexts, deciding which operations and methods to use and why

Notes and guidance (non-statutory)

Pupils continue to practise both mental methods and columnar addition and subtraction with increasingly large numbers to aid fluency (see Mathematics appendix 1).

Number - multiplication and division

Pupils should be taught to:

recall multiplication and division facts for multiplication tables up to 12 × 12
use place value, known and derived facts to multiply and divide mentally, including: multiplying by 0 and 1; dividing by 1; multiplying together 3 numbers
recognise and use factor pairs and commutativity in mental calculations
multiply two-digit and three-digit numbers by a one-digit number using formal written layout
solve problems involving multiplying and adding, including using the distributive law to multiply two-digit numbers by 1 digit, integer scaling problems and harder correspondence problems such as n objects are connected to m objects

Notes and guidance (non-statutory)

Pupils continue to practise recalling and using multiplication tables and related division facts to aid fluency.

Pupils practise mental methods and extend this to 3-digit numbers to derive facts, (for example 600 ÷ 3 = 200 can be derived from 2 x 3 = 6).

Pupils practise to become fluent in the formal written method of short multiplication and short division with exact answers (see Mathematics appendix 1).

Pupils write statements about the equality of expressions (for example, use the distributive law 39 × 7 = 30 × 7 + 9 × 7 and associative law (2 × 3) × 4 = 2 × (3 × 4)). They combine their knowledge of number facts and rules of arithmetic to solve mental and written calculations for example, 2 x 6 x 5 = 10 x 6 = 60.

Pupils solve two-step problems in contexts, choosing the appropriate operation, working with increasingly harder numbers. This should include correspondence questions such as the numbers of choices of a meal on a menu, or 3 cakes shared equally between 10 children.

Number - fractions (including decimals)

Pupils should be taught to:

Notes and guidance (non-statutory)

Pupils should connect hundredths to tenths and place value and decimal measure.

They extend the use of the number line to connect fractions, numbers and measures.

Pupils understand the relation between non-unit fractions and multiplication and division of quantities, with particular emphasis on tenths and hundredths.

Pupils make connections between fractions of a length, of a shape and as a representation of one whole or set of quantities. Pupils use factors and multiples to recognise equivalent fractions and simplify where appropriate (for example, 6/9 = 2/3 or 1/4 = 2/8 ).

Pupils continue to practise adding and subtracting fractions with the same denominator, to become fluent through a variety of increasingly complex problems beyond one whole. Pupils are taught throughout that decimals and fractions are different ways of expressing numbers and proportions.

Pupils' understanding of the number system and decimal place value is extended at this stage to tenths and then hundredths. This includes relating the decimal notation to division of whole number by 10 and later 100.

They practise counting using simple fractions and decimals, both forwards and backwards.

Pupils learn decimal notation and the language associated with it, including in the context of measurements. They make comparisons and order decimal amounts and quantities that are expressed to the same number of decimal places. They should be able to represent numbers with 1 or 2 decimal places in several ways, such as on number lines.

Measurement

Pupils should be taught to:

convert between different units of measure [for example, kilometre to metre; hour to minute]
measure and calculate the perimeter of a rectilinear figure (including squares) in centimetres and metres
find the area of rectilinear shapes by counting squares
estimate, compare and calculate different measures, including money in pounds and pence
read, write and convert time between analogue and digital 12- and 24-hour clocks
solve problems involving converting from hours to minutes, minutes to seconds, years to months, weeks to days

Notes and guidance (non-statutory)

Pupils build on their understanding of place value and decimal notation to record metric measures, including money.

They use multiplication to convert from larger to smaller units.

Perimeter can be expressed algebraically as 2(a + b) where a and b are the dimensions in the same unit.

They relate area to arrays and multiplication.

Geometry - properties of shapes

Pupils should be taught to:

compare and classify geometric shapes, including quadrilaterals and triangles, based on their properties and sizes
identify acute and obtuse angles and compare and order angles up to 2 right angles by size
identify lines of symmetry in 2-D shapes presented in different orientations
complete a simple symmetric figure with respect to a specific line of symmetry

Notes and guidance (non-statutory)

Pupils continue to classify shapes using geometrical properties, extending to classifying different triangles (for example, isosceles, equilateral, scalene) and quadrilaterals (for example, parallelogram, rhombus, trapezium).

Pupils compare and order angles in preparation for using a protractor and compare lengths and angles to decide if a polygon is regular or irregular.

Pupils draw symmetric patterns using a variety of media to become familiar with different orientations of lines of symmetry; and recognise line symmetry in a variety of diagrams, including where the line of symmetry does not dissect the original shape.

Geometry - position and direction

Pupils should be taught to:

describe positions on a 2-D grid as coordinates in the first quadrant
describe movements between positions as translations of a given unit to the left/right and up/down
plot specified points and draw sides to complete a given polygon

Notes and guidance (non-statutory)

Pupils draw a pair of axes in one quadrant, with equal scales and integer labels. They read, write and use pairs of co-ordinates, for example (2, 5), including using co-ordinate-plotting ICT tools.

Statistics

Pupils should be taught to:

interpret and present discrete and continuous data using appropriate graphical methods, including bar charts and time graphs
solve comparison, sum and difference problems using information presented in bar charts, pictograms, tables and other graphs

Notes and guidance (non-statutory)

Pupils understand and use a greater range of scales in their representations.

Pupils begin to relate the graphical representation of data to recording change over time.

Upper key stage 2 - years 5 and 6

The principal focus of mathematics teaching in upper key stage 2 is to ensure that pupils extend their understanding of the number system and place value to include larger integers. This should develop the connections that pupils make between multiplication and division with fractions, decimals, percentages and ratio.

At this stage, pupils should develop their ability to solve a wider range of problems, including increasingly complex properties of numbers and arithmetic, and problems demanding efficient written and mental methods of calculation. With this foundation in arithmetic, pupils are introduced to the language of algebra as a means for solving a variety of problems. Teaching in geometry and measures should consolidate and extend knowledge developed in number. Teaching should also ensure that pupils classify shapes with increasingly complex geometric properties and that they learn the vocabulary they need to describe them.

By the end of year 6, pupils should be fluent in written methods for all 4 operations, including long multiplication and division, and in working with fractions, decimals and percentages.

Pupils should read, spell and pronounce mathematical vocabulary correctly.

Year 5 programme of study

Number - number and place value

Pupils should be taught to:

read, write, order and compare numbers to at least 1,000,000 and determine the value of each digit
count forwards or backwards in steps of powers of 10 for any given number up to 1,000,000
interpret negative numbers in context, count forwards and backwards with positive and negative whole numbers, including through 0
round any number up to 1,000,000 to the nearest 10, 100, 1,000, 10,000 and 100,000
solve number problems and practical problems that involve all of the above
read Roman numerals to 1,000 (M) and recognise years written in Roman numerals

Notes and guidance (non-statutory)

Pupils identify the place value in large whole numbers.

They continue to use number in context, including measurement. Pupils extend and apply their understanding of the number system to the decimal numbers and fractions that they have met so far.

They should recognise and describe linear number sequences (for example, 3, 3 1/2 , 4, 4 1/2 …), including those involving fractions and decimals, and find the term-to-term rule in words (for example, add 1/2 ).

Number - addition and subtraction

Pupils should be taught to:

add and subtract whole numbers with more than 4 digits, including using formal written methods (columnar addition and subtraction)
add and subtract numbers mentally with increasingly large numbers
use rounding to check answers to calculations and determine, in the context of a problem, levels of accuracy
solve addition and subtraction multi-step problems in contexts, deciding which operations and methods to use and why

Notes and guidance (non-statutory)

Pupils practise using the formal written methods of columnar addition and subtraction with increasingly large numbers to aid fluency (see Mathematics appendix 1).

They practise mental calculations with increasingly large numbers to aid fluency (for example, 12,462 – 2,300 = 10,162).

Number - multiplication and division

Pupils should be taught to:

identify multiples and factors, including finding all factor pairs of a number, and common factors of 2 numbers
know and use the vocabulary of prime numbers, prime factors and composite (non-prime) numbers
establish whether a number up to 100 is prime and recall prime numbers up to 19
multiply numbers up to 4 digits by a one- or two-digit number using a formal written method, including long multiplication for two-digit numbers
multiply and divide numbers mentally, drawing upon known facts
divide numbers up to 4 digits by a one-digit number using the formal written method of short division and interpret remainders appropriately for the context
multiply and divide whole numbers and those involving decimals by 10, 100 and 1,000
recognise and use square numbers and cube numbers, and the notation for squared (²) and cubed (³)
solve problems involving multiplication and division, including using their knowledge of factors and multiples, squares and cubes
solve problems involving addition, subtraction, multiplication and division and a combination of these, including understanding the meaning of the equals sign
solve problems involving multiplication and division, including scaling by simple fractions and problems involving simple rates

Notes and guidance (non-statutory)

Pupils practise and extend their use of the formal written methods of short multiplication and short division (see Mathematics appendix 1). They apply all the multiplication tables and related division facts frequently, commit them to memory and use them confidently to make larger calculations.

They use and understand the terms factor, multiple and prime, square and cube numbers.

Pupils interpret non-integer answers to division by expressing results in different ways according to the context, including with remainders, as fractions, as decimals or by rounding (for example, 98 ÷ 4 = 98/4 = 24 r 2 = 24 1/2 = 24.5 ≈ 25).

Pupils use multiplication and division as inverses to support the introduction of ratio in year 6, for example, by multiplying and dividing by powers of 10 in scale drawings or by multiplying and dividing by powers of a 1,000 in converting between units such as kilometres and metres.

Distributivity can be expressed as a(b + c) = ab + ac.

They understand the terms factor, multiple and prime, square and cube numbers and use them to construct equivalence statements (for example, 4 x 35 = 2 x 2 x 35; 3 x 270 = 3 x 3 x 9 x 10 = 9² x 10).

Pupils use and explain the equals sign to indicate equivalence, including in missing number problems (for example 13 + 24 = 12 + 25; 33 = 5 x ?).

Number - fractions (including decimals and percentages)

Pupils should be taught to:

compare and order fractions whose denominators are all multiples of the same number
identify, name and write equivalent fractions of a given fraction, represented visually, including tenths and hundredths
recognise mixed numbers and improper fractions and convert from one form to the other and write mathematical statements > 1 as a mixed number [for example, + = = 1 ]
add and subtract fractions with the same denominator, and denominators that are multiples of the same number
multiply proper fractions and mixed numbers by whole numbers, supported by materials and diagrams
read and write decimal numbers as fractions [for example, 0.71 = ]
recognise and use thousandths and relate them to tenths, hundredths and decimal equivalents
round decimals with 2 decimal places to the nearest whole number and to 1 decimal place
read, write, order and compare numbers with up to 3 decimal places
solve problems involving number up to 3 decimal places
recognise the per cent symbol (%) and understand that per cent relates to 'number of parts per 100', and write percentages as a fraction with denominator 100, and as a decimal fraction
solve problems which require knowing percentage and decimal equivalents of , , , , and those fractions with a denominator of a multiple of 10 or 25

Notes and guidance (non-statutory)

Pupils should be taught throughout that percentages, decimals and fractions are different ways of expressing proportions.

They extend their knowledge of fractions to thousandths and connect to decimals and measures.

Pupils connect equivalent fractions > 1 that simplify to integers with division and other fractions > 1 to division with remainders, using the number line and other models, and hence move from these to improper and mixed fractions.

Pupils connect multiplication by a fraction to using fractions as operators (fractions of), and to division, building on work from previous years. This relates to scaling by simple fractions, including fractions > 1.

Pupils practise adding and subtracting fractions to become fluent through a variety of increasingly complex problems. They extend their understanding of adding and subtracting fractions to calculations that exceed 1 as a mixed number.

Pupils continue to practise counting forwards and backwards in simple fractions.

Pupils continue to develop their understanding of fractions as numbers, measures and operators by finding fractions of numbers and quantities. Pupils extend counting from year 4, using decimals and fractions including bridging 0, for example on a number line.

Pupils say, read and write decimal fractions and related tenths, hundredths and thousandths accurately and are confident in checking the reasonableness of their answers to problems.

They mentally add and subtract tenths, and one-digit whole numbers and tenths.

They practise adding and subtracting decimals, including a mix of whole numbers and decimals, decimals with different numbers of decimal places, and complements of 1 (for example, 0.83 + 0.17 = 1).

Pupils should go beyond the measurement and money models of decimals, for example, by solving puzzles involving decimals.

Pupils should make connections between percentages, fractions and decimals (for example, 100% represents a whole quantity and 1% is 1/100 , 50% is 50/100 , 25% is 25/100 ) and relate this to finding 'fractions of'.

Measurement

Pupils should be taught to:

convert between different units of metric measure [for example, kilometre and metre; centimetre and metre; centimetre and millimetre; gram and kilogram; litre and millilitre]
understand and use approximate equivalences between metric units and common imperial units such as inches, pounds and pints
measure and calculate the perimeter of composite rectilinear shapes in centimetres and metres
calculate and compare the area of rectangles (including squares), including using standard units, square centimetres (cm²) and square metres (m²), and estimate the area of irregular shapes
estimate volume [for example, using 1 cm³ blocks to build cuboids (including cubes)] and capacity [for example, using water]
solve problems involving converting between units of time
use all four operations to solve problems involving measure [for example, length, mass, volume, money] using decimal notation, including scaling

Notes and guidance (non-statutory)

Pupils use their knowledge of place value and multiplication and division to convert between standard units.

Pupils calculate the perimeter of rectangles and related composite shapes, including using the relations of perimeter or area to find unknown lengths. Missing measures questions such as these can be expressed algebraically, for example 4 + 2b = 20 for a rectangle of sides 2 cm and b cm and perimeter of 20cm.

Pupils calculate the area from scale drawings using given measurements.

Pupils use all 4 operations in problems involving time and money, including conversions (for example, days to weeks, expressing the answer as weeks and days).

Geometry - properties of shapes

Pupils should be taught to:

identify 3-D shapes, including cubes and other cuboids, from 2-D representations
know angles are measured in degrees: estimate and compare acute, obtuse and reflex angles
draw given angles, and measure them in degrees (°)
identify:
- angles at a point and 1 whole turn (total 360°)
- angles at a point on a straight line and half a turn (total 180°)
- other multiples of 90°
- use the properties of rectangles to deduce related facts and find missing lengths and angles
- distinguish between regular and irregular polygons based on reasoning about equal sides and angles

Notes and guidance (non-statutory)

Pupils become accurate in drawing lines with a ruler to the nearest millimetre, and measuring with a protractor. They use conventional markings for parallel lines and right angles.

Pupils use the term diagonal and make conjectures about the angles formed between sides, and between diagonals and parallel sides, and other properties of quadrilaterals, for example using dynamic geometry ICT tools.

Pupils use angle sum facts and other properties to make deductions about missing angles and relate these to missing number problems.

Geometry - position and direction

Pupils should be taught to:

identify, describe and represent the position of a shape following a reflection or translation, using the appropriate language, and know that the shape has not changed

Notes and guidance (non-statutory)

Pupils recognise and use reflection and translation in a variety of diagrams, including continuing to use a 2-D grid and coordinates in the first quadrant. Reflection should be in lines that are parallel to the axes.

Statistics

Pupils should be taught to:

solve comparison, sum and difference problems using information presented in a line graph
complete, read and interpret information in tables, including timetables

Notes and guidance (non-statutory)

Pupils connect their work on coordinates and scales to their interpretation of time graphs.

They begin to decide which representations of data are most appropriate and why.

Year 6 programme of study

Number - number and place value

Pupils should be taught to:

read, write, order and compare numbers up to 10,000,000 and determine the value of each digit
round any whole number to a required degree of accuracy
use negative numbers in context, and calculate intervals across 0
solve number and practical problems that involve all of the above

Notes and guidance (non-statutory)

Pupils use the whole number system, including saying, reading and writing numbers accurately.

Number - addition, subtraction, multiplication and division

Pupils should be taught to:

multiply multi-digit numbers up to 4 digits by a two-digit whole number using the formal written method of long multiplication
divide numbers up to 4 digits by a two-digit whole number using the formal written method of long division, and interpret remainders as whole number remainders, fractions, or by rounding, as appropriate for the context
divide numbers up to 4 digits by a two-digit number using the formal written method of short division where appropriate, interpreting remainders according to the context
perform mental calculations, including with mixed operations and large numbers
identify common factors, common multiples and prime numbers
use their knowledge of the order of operations to carry out calculations involving the 4 operations
solve addition and subtraction multi-step problems in contexts, deciding which operations and methods to use and why
solve problems involving addition, subtraction, multiplication and division
use estimation to check answers to calculations and determine, in the context of a problem, an appropriate degree of accuracy

Notes and guidance (non-statutory)

Pupils practise addition, subtraction, multiplication and division for larger numbers, using the formal written methods of columnar addition and subtraction, short and long multiplication, and short and long division (see Mathematics appendix 1).

They undertake mental calculations with increasingly large numbers and more complex calculations.

Pupils continue to use all the multiplication tables to calculate mathematical statements in order to maintain their fluency.

Pupils round answers to a specified degree of accuracy, for example, to the nearest 10, 20, 50, etc, but not to a specified number of significant figures.

Pupils explore the order of operations using brackets; for example, 2 + 1 x 3 = 5 and (2 + 1) x 3 = 9.

Common factors can be related to finding equivalent fractions.

Number - Fractions (including decimals and percentages)

Pupils should be taught to:

use common factors to simplify fractions; use common multiples to express fractions in the same denomination
compare and order fractions, including fractions >1
add and subtract fractions with different denominators and mixed numbers, using the concept of equivalent fractions
multiply simple pairs of proper fractions, writing the answer in its simplest form [for example, × = ]
divide proper fractions by whole numbers [for example, ÷ 2 = ]
associate a fraction with division and calculate decimal fraction equivalents [for example, 0.375] for a simple fraction [for example, ]
identify the value of each digit in numbers given to 3 decimal places and multiply and divide numbers by 10, 100 and 1,000 giving answers up to 3 decimal places
multiply one-digit numbers with up to 2 decimal places by whole numbers
use written division methods in cases where the answer has up to 2 decimal places
solve problems which require answers to be rounded to specified degrees of accuracy
recall and use equivalences between simple fractions, decimals and percentages, including in different contexts

Notes and guidance (non-statutory)

Pupils should practise, use and understand the addition and subtraction of fractions with different denominators by identifying equivalent fractions with the same denominator. They should start with fractions where the denominator of one fraction is a multiple of the other (for example, 1/2 + 1/8 = 5/8 ] and progress to varied and increasingly complex problems.

Pupils should use a variety of images to support their understanding of multiplication with fractions. This follows earlier work about fractions as operators (fractions of), as numbers, and as equal parts of objects, for example as parts of a rectangle.

Pupils use their understanding of the relationship between unit fractions and division to work backwards by multiplying a quantity that represents a unit fraction to find the whole quantity (for example, if quarter of a length is 36cm, then the whole length is 36 × 4 = 144cm).

They practise calculations with simple fractions and decimal fraction equivalents to aid fluency, including listing equivalent fractions to identify fractions with common denominators.

Pupils can explore and make conjectures about converting a simple fraction to a decimal fraction (for example, 3 ÷ 8 = 0.375). For simple fractions with recurring decimal equivalents, pupils learn about rounding the decimal to three decimal places, or other appropriate approximations depending on the context. Pupils multiply and divide numbers with up to 2 decimal places by one-digit and two-digit whole numbers. Pupils multiply decimals by whole numbers, starting with the simplest cases, such as 0.4 × 2 = 0.8, and in practical contexts, such as measures and money.

Pupils are introduced to the division of decimal numbers by one-digit whole numbers, initially, in practical contexts involving measures and money. They recognise division calculations as the inverse of multiplication.

Pupils also develop their skills of rounding and estimating as a means of predicting and checking the order of magnitude of their answers to decimal calculations. This includes rounding answers to a specified degree of accuracy and checking the reasonableness of their answers.

Ratio and proportion

Pupils should be taught to:

solve problems involving the relative sizes of 2 quantities where missing values can be found by using integer multiplication and division facts
solve problems involving the calculation of percentages [for example, of measures and such as 15% of 360] and the use of percentages for comparison
solve problems involving similar shapes where the scale factor is known or can be found
solve problems involving unequal sharing and grouping using knowledge of fractions and multiples

Notes and guidance (non-statutory)

Pupils recognise proportionality in contexts when the relations between quantities are in the same ratio (for example, similar shapes and recipes).

Pupils link percentages or 360° to calculating angles of pie charts.

Pupils should consolidate their understanding of ratio when comparing quantities, sizes and scale drawings by solving a variety of problems. They might use the notation a:b to record their work.

Pupils solve problems involving unequal quantities, for example, 'for every egg you need 3 spoonfuls of flour', ' 3/5 of the class are boys'. These problems are the foundation for later formal approaches to ratio and proportion.

Algebra

Pupils should be taught to:

use simple formulae
generate and describe linear number sequences
express missing number problems algebraically
find pairs of numbers that satisfy an equation with 2 unknowns
enumerate possibilities of combinations of 2 variables

Notes and guidance (non-statutory)

Pupils should be introduced to the use of symbols and letters to represent variables and unknowns in mathematical situations that they already understand, such as:

missing numbers, lengths, coordinates and angles
formulae in mathematics and science
equivalent expressions (for example, a + b = b + a)
generalisations of number patterns
number puzzles (for example, what 2 numbers can add up to)

Measurement

Pupils should be taught to:

solve problems involving the calculation and conversion of units of measure, using decimal notation up to 3 decimal places where appropriate
use, read, write and convert between standard units, converting measurements of length, mass, volume and time from a smaller unit of measure to a larger unit, and vice versa, using decimal notation to up to 3 decimal places
convert between miles and kilometres
recognise that shapes with the same areas can have different perimeters and vice versa
recognise when it is possible to use formulae for area and volume of shapes
calculate the area of parallelograms and triangles
calculate, estimate and compare volume of cubes and cuboids using standard units, including cubic centimetres (cm³) and cubic metres (m³), and extending to other units [for example, mm³ and km³]

Notes and guidance (non-statutory)

Pupils connect conversion (for example, from kilometres to miles) to a graphical representation as preparation for understanding linear/proportional graphs.

They know approximate conversions and are able to tell if an answer is sensible.

Using the number line, pupils use, add and subtract positive and negative integers for measures such as temperature.

They relate the area of rectangles to parallelograms and triangles, for example, by dissection, and calculate their areas, understanding and using the formulae (in words or symbols) to do this.

Pupils could be introduced to compound units for speed, such as miles per hour, and apply their knowledge in science or other subjects as appropriate.

Geometry - properties of shapes

Pupils should be taught to:

draw 2-D shapes using given dimensions and angles
recognise, describe and build simple 3-D shapes, including making nets
compare and classify geometric shapes based on their properties and sizes and find unknown angles in any triangles, quadrilaterals, and regular polygons
illustrate and name parts of circles, including radius, diameter and circumference and know that the diameter is twice the radius
recognise angles where they meet at a point, are on a straight line, or are vertically opposite, and find missing angles

Notes and guidance (non-statutory)

Pupils draw shapes and nets accurately, using measuring tools and conventional markings and labels for lines and angles.

Pupils describe the properties of shapes and explain how unknown angles and lengths can be derived from known measurements.

These relationships might be expressed algebraically for example, d = 2 × r; a = 180 − (b + c).

Geometry - position and direction

Pupils should be taught to:

describe positions on the full coordinate grid (all 4 quadrants)
draw and translate simple shapes on the coordinate plane, and reflect them in the axes

Notes and guidance (non-statutory)

Pupils draw and label a pair of axes in all 4 quadrants with equal scaling. This extends their knowledge of one quadrant to all 4 quadrants, including the use of negative numbers.

Pupils draw and label rectangles (including squares), parallelograms and rhombuses, specified by coordinates in the four quadrants, predicting missing coordinates using the properties of shapes. These might be expressed algebraically for example, translating vertex (a, b) to (a − 2, b + 3); (a, b) and (a + d, b + d) being opposite vertices of a square of side d.

Statistics

Pupils should be taught to:

interpret and construct pie charts and line graphs and use these to solve problems
calculate and interpret the mean as an average

Notes and guidance (non-statutory)

Pupils connect their work on angles, fractions and percentages to the interpretation of pie charts.

Pupils both encounter and draw graphs relating 2 variables, arising from their own enquiry and in other subjects.

They should connect conversion from kilometres to miles in measurement to its graphical representation.

Pupils know when it is appropriate to find the mean of a data set.

Key stage 3

Introduction

Mathematics is an interconnected subject in which pupils need to be able to move fluently between representations of mathematical ideas. The programme of study for key stage 3 is organised into apparently distinct domains, but pupils should build on key stage 2 and connections across mathematical ideas to develop fluency, mathematical reasoning and competence in solving increasingly sophisticated problems. They should also apply their mathematical knowledge in science, geography, computing and other subjects.

Decisions about progression should be based on the security of pupils' understanding and their readiness to progress to the next stage. Pupils who grasp concepts rapidly should be challenged through being offered rich and sophisticated problems before any acceleration through new content in preparation for key stage 4. Those who are not sufficiently fluent should consolidate their understanding, including through additional practice, before moving on.

Working mathematically

Through the mathematics content, pupils should be taught to:

Develop fluency

consolidate their numerical and mathematical capability from key stage 2 and extend their understanding of the number system and place value to include decimals, fractions, powers and roots
select and use appropriate calculation strategies to solve increasingly complex problems
use algebra to generalise the structure of arithmetic, including to formulate mathematical relationships
substitute values in expressions, rearrange and simplify expressions, and solve equations
move freely between different numerical, algebraic, graphical and diagrammatic representations [for example, equivalent fractions, fractions and decimals, and equations and graphs]
develop algebraic and graphical fluency, including understanding linear and simple quadratic functions
use language and properties precisely to analyse numbers, algebraic expressions, 2-D and 3-D shapes, probability and statistics

Reason mathematically

extend their understanding of the number system; make connections between number relationships, and their algebraic and graphical representations
extend and formalise their knowledge of ratio and proportion in working with measures and geometry, and in formulating proportional relations algebraically
identify variables and express relations between variables algebraically and graphically
make and test conjectures about patterns and relationships; look for proofs or counter-examples
begin to reason deductively in geometry, number and algebra, including using geometrical constructions
interpret when the structure of a numerical problem requires additive, multiplicative or proportional reasoning
explore what can and cannot be inferred in statistical and probabilistic settings, and begin to express their arguments formally

Solve problems

develop their mathematical knowledge, in part through solving problems and evaluating the outcomes, including multi-step problems
develop their use of formal mathematical knowledge to interpret and solve problems, including in financial mathematics
begin to model situations mathematically and express the results using a range of formal mathematical representations
select appropriate concepts, methods and techniques to apply to unfamiliar and non-routine problems

Subject content

Number

Pupils should be taught to:

understand and use place value for decimals, measures and integers of any size
order positive and negative integers, decimals and fractions; use the number line as a model for ordering of the real numbers; use the symbols =, ≠, <, >, ≤, ≥
use the concepts and vocabulary of prime numbers, factors (or divisors), multiples, common factors, common multiples, highest common factor, lowest common multiple, prime factorisation, including using product notation and the unique factorisation property
use the 4 operations, including formal written methods, applied to integers, decimals, proper and improper fractions, and mixed numbers, all both positive and negative
use conventional notation for the priority of operations, including brackets, powers, roots and reciprocals
recognise and use relationships between operations including inverse operations
use integer powers and associated real roots (square, cube and higher), recognise powers of 2, 3, 4, 5 and distinguish between exact representations of roots and their decimal approximations
interpret and compare numbers in standard form A x 10ⁿ 1≤A<10, where n is a positive or negative integer or 0
work interchangeably with terminating decimals and their corresponding fractions (such as 3.5 and or 0.375 and )
define percentage as 'number of parts per hundred', interpret percentages and percentage changes as a fraction or a decimal, interpret these multiplicatively, express 1 quantity as a percentage of another, compare 2 quantities using percentages, and work with percentages greater than 100%
interpret fractions and percentages as operators
use standard units of mass, length, time, money and other measures, including with decimal quantities
round numbers and measures to an appropriate degree of accuracy [for example, to a number of decimal places or significant figures]
use approximation through rounding to estimate answers and calculate possible resulting errors expressed using inequality notation a<x≤b
use a calculator and other technologies to calculate results accurately and then interpret them appropriately
appreciate the infinite nature of the sets of integers, real and rational numbers

Algebra

Pupils should be taught to:

use and interpret algebraic notation, including:
- ab in place of a × b
- 3y in place of y + y + y and 3 × y
- a² in place of a × a, a³ in place of a × a × a; a²b in place of a × a × b
- in place of a ÷ b
- coefficients written as fractions rather than as decimals
- brackets
substitute numerical values into formulae and expressions, including scientific formulae
understand and use the concepts and vocabulary of expressions, equations, inequalities, terms and factors
simplify and manipulate algebraic expressions to maintain equivalence by:
- collecting like terms
- multiplying a single term over a bracket
- taking out common factors
- expanding products of 2 or more binomials
understand and use standard mathematical formulae; rearrange formulae to change the subject
model situations or procedures by translating them into algebraic expressions or formulae and by using graphs
use algebraic methods to solve linear equations in 1 variable (including all forms that require rearrangement)
work with coordinates in all 4 quadrants
recognise, sketch and produce graphs of linear and quadratic functions of 1 variable with appropriate scaling, using equations in x and y and the Cartesian plane
interpret mathematical relationships both algebraically and graphically
reduce a given linear equation in 2 variables to the standard form y = mx + c; calculate and interpret gradients and intercepts of graphs of such linear equations numerically, graphically and algebraically
use linear and quadratic graphs to estimate values of y for given values of x and vice versa and to find approximate solutions of simultaneous linear equations
find approximate solutions to contextual problems from given graphs of a variety of functions, including piece-wise linear, exponential and reciprocal graphs
generate terms of a sequence from either a term-to-term or a position-to-term rule
recognise arithmetic sequences and find the nth term
recognise geometric sequences and appreciate other sequences that arise

Ratio, proportion and rates of change

Pupils should be taught to:

change freely between related standard units [for example time, length, area, volume/capacity, mass]
use scale factors, scale diagrams and maps
express 1 quantity as a fraction of another, where the fraction is less than 1 and greater than 1
use ratio notation, including reduction to simplest form
divide a given quantity into 2 parts in a given part:part or part:whole ratio; express the division of a quantity into 2 parts as a ratio
understand that a multiplicative relationship between 2 quantities can be expressed as a ratio or a fraction
relate the language of ratios and the associated calculations to the arithmetic of fractions and to linear functions
solve problems involving percentage change, including: percentage increase, decrease and original value problems and simple interest in financial mathematics
solve problems involving direct and inverse proportion, including graphical and algebraic representations
use compound units such as speed, unit pricing and density to solve problems

Geometry and measures

Pupils should be taught to:

derive and apply formulae to calculate and solve problems involving: perimeter and area of triangles, parallelograms, trapezia, volume of cuboids (including cubes) and other prisms (including cylinders)
calculate and solve problems involving: perimeters of 2-D shapes (including circles), areas of circles and composite shapes
draw and measure line segments and angles in geometric figures, including interpreting scale drawings
derive and use the standard ruler and compass constructions (perpendicular bisector of a line segment, constructing a perpendicular to a given line from/at a given point, bisecting a given angle); recognise and use the perpendicular distance from a point to a line as the shortest distance to the line
describe, sketch and draw using conventional terms and notations: points, lines, parallel lines, perpendicular lines, right angles, regular polygons, and other polygons that are reflectively and rotationally symmetric
use the standard conventions for labelling the sides and angles of triangle ABC, and know and use the criteria for congruence of triangles
derive and illustrate properties of triangles, quadrilaterals, circles, and other plane figures [for example, equal lengths and angles] using appropriate language and technologies
identify properties of, and describe the results of, translations, rotations and reflections applied to given figures
identify and construct congruent triangles, and construct similar shapes by enlargement, with and without coordinate grids
apply the properties of angles at a point, angles at a point on a straight line, vertically opposite angles
understand and use the relationship between parallel lines and alternate and corresponding angles
derive and use the sum of angles in a triangle and use it to deduce the angle sum in any polygon, and to derive properties of regular polygons
apply angle facts, triangle congruence, similarity and properties of quadrilaterals to derive results about angles and sides, including Pythagoras' Theorem, and use known results to obtain simple proofs
use Pythagoras' Theorem and trigonometric ratios in similar triangles to solve problems involving right-angled triangles
use the properties of faces, surfaces, edges and vertices of cubes, cuboids, prisms, cylinders, pyramids, cones and spheres to solve problems in 3-D
interpret mathematical relationships both algebraically and geometrically

Probability

Pupils should be taught to:

record, describe and analyse the frequency of outcomes of simple probability experiments involving randomness, fairness, equally and unequally likely outcomes, using appropriate language and the 0-1 probability scale
understand that the probabilities of all possible outcomes sum to 1
enumerate sets and unions/intersections of sets systematically, using tables, grids and Venn diagrams
generate theoretical sample spaces for single and combined events with equally likely, mutually exclusive outcomes and use these to calculate theoretical probabilities

Statistics

Pupils should be taught to:

describe, interpret and compare observed distributions of a single variable through: appropriate graphical representation involving discrete, continuous and grouped data; and appropriate measures of central tendency (mean, mode, median) and spread (range, consideration of outliers)
construct and interpret appropriate tables, charts, and diagrams, including frequency tables, bar charts, pie charts, and pictograms for categorical data, and vertical line (or bar) charts for ungrouped and grouped numerical data
describe simple mathematical relationships between 2 variables (bivariate data) in observational and experimental contexts and illustrate using scatter graphs

Key stage 4

This programme of study specifies:

the mathematical content that should be taught to all pupils, in standard type
additional mathematical content to be taught to more highly attaining pupils, in braces { }

Together, the mathematical content set out in the key stage 3 and key stage 4 programmes of study covers the full range of material contained in the GCSE Mathematics qualification. Wherever it is appropriate, given pupils' security of understanding and readiness to progress, pupils should be taught the full content set out in this programme of study.

Working mathematically

Through the mathematics content pupils should be taught to:

Develop fluency

consolidate their numerical and mathematical capability from key stage 3 and extend their understanding of the number system to include powers, roots {and fractional indices}
select and use appropriate calculation strategies to solve increasingly complex problems, including exact calculations involving multiples of π {and surds}, use of standard form and application and interpretation of limits of accuracy
consolidate their algebraic capability from key stage 3 and extend their understanding of algebraic simplification and manipulation to include quadratic expressions, {and expressions involving surds and algebraic fractions}
extend fluency with expressions and equations from key stage 3, to include quadratic equations, simultaneous equations and inequalities
move freely between different numerical, algebraic, graphical and diagrammatic representations, including of linear, quadratic, reciprocal, {exponential and trigonometric} functions
use mathematical language and properties precisely

Reason mathematically

extend and formalise their knowledge of ratio and proportion, including trigonometric ratios, in working with measures and geometry, and in working with proportional relations algebraically and graphically
extend their ability to identify variables and express relations between variables algebraically and graphically
make and test conjectures about the generalisations that underlie patterns and relationships; look for proofs or counter-examples; begin to use algebra to support and construct arguments {and proofs}
reason deductively in geometry, number and algebra, including using geometrical constructions
interpret when the structure of a numerical problem requires additive, multiplicative or proportional reasoning
explore what can and cannot be inferred in statistical and probabilistic settings, and express their arguments formally
assess the validity of an argument and the accuracy of a given way of presenting information